Listening to WXPN 88.5's '885 best and 88 worst songs ever' countdown

24-25 October 2014

I delayed all work to prepare for this radio event, of which the 'worst songs' part was simply hysterical.  'XPN's program director Dan Reed deserves much credit, firstly for being an excellent DJ, providing information, context, and witty banter (as well as interviews with artistes and persona guests), and secondly for actually enduring all seven hours of the worst songs ever.

One thing I had to do was to move the speakers out to the cockpit to continue work on the hull.  On our Raider 33 Antigone we had cockpit speakers which my brother Steve made for his old Fiat, which had come with none.  They were nifty little white-overlay-plywood boxes with aluminum grilles and Sparkomatic 6x9s in them.  I came up with the idea (which I don't remember if we actually did) of mounting a Herreshoff-style cleat on the top of each one, to serve as a handle and a place to wrap the cord.  We just took these out and stood them on the cockpit seats whenever we wanted them.

For Diana I'm doing the same thing, likely with these nice little speakers which come from a 1980s Sony component portable stereo (which is currently in the boat).  I have already run the speaker cables back to the lazarrette but have yet to decide if I want to install connection points in the side of the little Dorade box or just to leave them below.  I hate how I screwed this little box to its mounting cleats; I should have used the cleat-on-cleat method that CY's Ziggy uses all the time as it hides the fasteners (provided there is interior access).  I will most probably plug these holes and add the cleats inside to do it that way... after the cover goes on and I remove the box for varnishing inside.

The Sea Dog low-profile vents are meant for the Dorade boxes on the cabintop.  The ones back here should be the taller traditional kind but as yet I have only ordered the low ones from Defender.

The one shown installed (and not totally pushed-in) is the one that vents through the Dorade box  and through a hose to the foot of the quarter berth.  It works great.  The other one leads directly through a hose to the bilge, where I have yet to fit a bilge blower for the gasoline vapors.  It is plugged here because, as Diana is not now swinging to weather on a mooring, I can't keep the cowl trimmed as an exhaust vent.

The patched hole in the cockpit was where I installed the Whale manual bilge pump, one of the first things I did when I got this boat as the cabin windows leaked like a sieve.  I decided to relocate it to the inside of the coaming, both because it's easier to operate while steering and because it'll free up access through this cockpit-seat locker.

WXPN is at xpn.org

The 'XPN radio event was really a lot of fun and I helped clog up Twitter with many comments.  As a result of the event's effect on listeners, '@885countdown' was the number-4 most-Tweeted event in the US on 24 October, easily number-1 in the Philadelphia region, and the station's own website crashed due to too much traffic.  Truly an event for the ages!

BTW: the number-one favorite song, as it had been at the last countdown in 2004, was Springsteen's 'Thunder Road'.  The worst one, on this, the first-ever worst-songs countdown, was Starship's 'We Built This City' (I am not making this up!).  And here I had thought 'Billy, Don't Be A Hero' was a shoo-in.

- JC2

* * *

Hunkered down

15 October 2014

Bill Robinson, editor of Yachting for many years, wrote a terrific book in about 1980 about cruising, using his own experiences including those of sailing the NJ Shore.  One sage observation he made was that the NJ Shore suffers one 'major weather event' every autumn, like between mid-September and early November.  Superstorm Sandy was our dose for 2012.  This week we were promised another, high winds and torrential rain.  Naturally I did not expect it to rise to any proportion of what Sandy was like; but being prudent I took some precautions, moved, stowed or weighted down everything loose about the yard, snugged up the covers and tightened the stands.

In this pic taken from the scaffolding around Jerry's C44 Second Alarm, Diana (with all her attendant gear)  is hunkered down for another dose of ugly, land-based weather.  But she survived Sandy just fine (despite some intense worrying on my part) and this mess, really just an extended squall, proved inconsequential.

The tarp on top is really just because the deck, cabin and cockpit are not yet painted and the holes for the sailing instruments in the back of the cabin are still covered only with plastic sheeting (and plastic bags) taped over them.

One cool thing about flush-decked and semi-flush-decked boats is that they present very little windage, even when hauled out, to aggressive weather.  Diana's 'blister-canopy' configuration is even better in such conditions than is the modest trunk cabin of her sistership (which is within 2 weeks of Diana's age).

The cabin windows and new foredeck hatch do not leak.

The new cockpit drains work really well-- if the boat were not slightly tilted to port, there'd be no water at all in the cockpit after a blow like this.

I leave the old running-light holes in the bow uncovered, for light and air; the amount of rainwater they let in, which runs straight down to the bilge, is insignificant.

* * *

Finalizing cabin and interior

Here are some pics of recent progress belowdeck.  Currently (June 20th) I am finishing the cabintop, fitting the Dorade boxes and hatch shroud, and remedying the PO's repair of the bow in preparation to paint the hull and fit the stem fitting.

Hanging locker

Aft of the port-side rode locker, opposite of the microwave and toolbox, was planned this locker.  In framing it I realized there was much more space than I expected.  As it is now, it has several bins to hold shoes, balled-up t-shirts and cottons, various personal effects as well as 12" worth of clothes on hangers.  Shirts and coats will fold onto the floor; but it's much better than having nowhere to hang clean clothes at all.

The first photo shows the after bulkhead, where the plumbing is (which necessitated the locker being delineated from the bunk space in the first instance).  The 1-1/2" vented loop is for the holding-tank pumpout; the smaller standpipe is the holding-tank vent which goes to a 3/4" through-hull in the hull.  The wiring will go to a 3-gang panel over the head sink for the lights.  The little 1-1/4" elbow shown coming through the wall is the head-sink drain, going to its trap and thence to 3/4" hose for the seacock.

I don't know if I've said this before but, when fitting plumbing traps to boat sinks, one should always make them turn forward or aft first and then inboard only after they have gone downwards, to ensure sufficient drainage on either tack.  (This says nothing about the shape of the basin which may retain water to leeward of the drain; but that can't be helped unless you have a basin more steeply sloped than the usual angle of heel.)

The other pic shows the forward side of the same locker.  The "Get A Grip' placard came from a hook-and-loop strap display at the West Marine store where I worked; I thought it was hysterical and swiped it from the trash when the sale was over and cut it to a minimal size (and then spilled acetone on it, causing the blur).  It's been in the boat for about 6 years and by now deserves a place as decor.

 

This locker will get covered with a canvas curtain to keep water out, as the foredeck hatch is directly overhead.

The vertical door-jamb pieces probably need some cleaner way of terminating outboard of the sill-- I'll look to that later.

Main cabin, aft

These two pics show the back corners of the main cabin, the electrical panel to port and the galley and bookcase to starboard.  Among other things can be seen my re-use of the (1974) teak fiddle rails that were originally fitted to the outboard hull shelves over the settees.  This wasn't an easy task since the cabin, as molded, is not symmetrical-- the port-side bulkhead was fully one inch wider than the starboard side, as is evident since the vertical posts are keyed to the hatch's opening.  The solution lay in justifiying the space between two spindles on the center of the opening and then ensuring that no spindles are too close to the ends.  I think one of them is a little off, by less than 1/8", but you won't be able to tell (and one strict rule of Diana is that no one is permitted to visit this boat with a ruler in hand!).

In the spirit of complete disclosure: the cheek piece at the after end of the overhead cabinet (where the radio goes) is teak, not mahogany!  It came from a very weathered piece in a trash bin and I didn't recognize it till I'd sanded it down and applied varnish.  Oh, well-- at least both sides are the same (from the same board in fact).

On neither side is the cap fitted to the top of the divider bulkhead.  I've been getting impatient about getting this stuff varnished and installed, just so it doesn't clutter up the cabin and inhibit other progress (as it's all been doing for too many years) and so I screwed this stuff into place as it is now.  I'll fit the cap pieces after I finish the after side of these bulkheads (more on that-- and a surprise! --later).

I haven't had the motivation to build the drawers for the galley yet and so the cabinet bulkhead beside the ladder is still missing.

I don't go in for the trite little piracy fetish so many yachties favor; but the skull-and-crossed-bones can cooler is in tribute to my late cousin Peter, who co-founded Raider Yacht (for which this was a logo).  So it shall remain on the boat.

  

Other stuff

Here is a cool pic of the foredeck hatch.  It lets in some phenomenal light-- you can read by it in the saloon, even during a rain, even with the other hatch closed.  I've been saying all along that if this project is taking far too long, at least I get to spend my days with gorgeous bits of varnished Honduras mahogany; and here's an example.

The stick holds up the hatch because the hardware isn't on yet.  The cords are what secures it down against wind, rattles and motion.

The green tape is a sign reminding me which end goes forward.  Remember that the hatch frame is cut from the base on the deck, to ensure that they fit together, before the base is installed.  Even with a rectangle it matters which way it goes.

Below is a pic of the (too dusty!) sink in the head.  The cabinet lift-out panels are not painted and so not fitted yet.  The leaning board is the divider, not screwed in, that will hold a shelf in the forward locker.

The portion of counter after of the seam in the fiddle hinges up for access to a 4-inch-deep bin (the original bin over the footwell of the settee berth.  The astute will recall that this idea was my contribution to this boat's design in 1972; see here).

I messed up the trim stick that goes atop the blue countertop along the forward bulkhead and it hasn't been remade and installed yet.  In (typical) impatience I had just "eyeballed" the angle against the fiddle and cut it; and it's too wrong to be tolerable.

I could have tugged the wire loom a little more tightly into the upper shelf, under the window, for this pic; but there's still wiring to be run in it.

Don't say anything about the after cheek piece protruding below the upper fiddle rail while the forward one remains even.  This is an oversight and will be remedied!  The trick deserving the credit is in the making of both cheek pieces, one wide and one narrower, so that they align with the locker face which, which like the sink-counter face, is parallel to the centerline.  How else would it have been done?

And this allows the curtain rods to be fastened to the cheek pieces, more or less parallel horizontally.  My mom, the accomplished seamstress, is currently making the curtains for these hull windows.

Main saloon

Lastly here is a pic of the saloon bulkhead after I fitted the cheek pieces along the top.  This had been long unfinished because I just didn't know a way of making it all in one piece; and then (in the shower, as so often happens) I conceived of the positively brilliant notion of making each side in two pieces.  I wanted some straight line to avoid emphasizing the roundness of the cabintop in here; and here is my solution: an ogee curve descending to a second cheek piece and a further horizontal line.  Together these just about cover the ragged fiberglass tape (though not quite) and represent an apparently-structural deck beam in conjunction with the compression post (the true structural deck beam is on the forward side of the bulkhead, requiring the horizontal door header).

In keeping with the conceit of having these pieces represent a real deck beam, I deliberately made these of Phillipine (lauan), not Honduras; so they appear greyer, darker, a little greener than the footwell trim and table cleat mounted lower on the bulkhead.  The cheek pieces to cover the gap between bulkhead and cabinside will be of (thinner) Honduras.

All of these pieces, as well as those on the forward side of this bulkhead, are "permanently" installed now.  If the white or varnish requires any more touching-up, it'll be done with them in situ.

I should have reinstalled the arched door header here; but in fitting the cheek pieces I ran one screw into the bulkhead, thinking it would be covered by the door header, and just missed; so I have to fill it and paint it again first.

Dave saw this and commented on my practice of simply screwing these pieces into place without concern for hiding the screw heads behind plugs or multiple cleats, saying it was just like what Uncle Joe would have done.  I took that as a high compliment, as I have long admired Uncle Joe's clearheaded sense about what's least complicated being the most aesthetically pleasant... but I really meant it all this way to be able to remove all these pieces for varnishing (and revarnishing.  As I always say, 'It's never the last coat of varnish!').

I have a really cool idea for after I paint the fiberglass around the companionway hatch (where the centerline is indicated, top of photo); but I won't share that till it's been done.  Stay tuned.

* * *

Some inconveniences are beyond counting

I once told my young brother-in-law, as he was building some plastic model airplane and complaining about glue on his fingertips, that to do a good job sometimes you have to love your project more than you care for your self.  This is especially true when it comes to convenience-- after all, most of the things we love are patently inconvenient.  And yet we pursue them anyway; and in this pursuit is how we acknowledge their value to us.

This photo is not great; it's intended to show the nice fat mahogany splinter I got in my foot.  (How? --I wasn't even barefoot.)  In this one week I got this splinter and another as well, tore my fingertips on a jigsaw blade (it was not running), jammed the meat of my hand in the drill-press chuck and mysteriously gashed my leg which bled all over the project in process.

The West Marine sticker is on my daughter's laptop.

Here is the top of the cabin, with no hatch or hatch shroud in place, the day I was fastening down the new hatch-slider rails.  The green tape along a piece of wood is a dam to keep epoxy from coursing down the side of the cabin and over the windows (already let that happen once, so never again!).  I had noticed a stickiness whenever I was kneeling a certain way but in the semi-mad rush to get the sticks into position and screwed down I attributed it to something stuck to my leg.  Only when I was done the most urgent part of it did I happen to notice the red stuff, which I then concluded was blood.

That's the foredeck's hatch coaming in the distance.  At the time of this photo the hatch shroud was being used to cover up that opening-- that's it even farther beyond.

Below you can see something of the main cabin, the compression post, the settee and head trim, and whatnot.


So I took this photo downwards at my leg, probably just to record the solution to the mystery.

Here I am standing up on the quarter berth, my other foot on the ladder step.  The quarter berth is (at this time) the current lumberyard.  The gap below my foot is the 'wet locker,' the one place inside the accommodation that goes straight to the hull skin itself.  Over this I would like to make a panel of slats, like the white-pine ceiling we make for C44s.  On the side of the ladder, behind my leg, goes the stainless-steel double hook to hang up wet foulies.  On the teak cabin face behind me is already another of these hooks.


You can see the cooler under the bottom shelf of the ladder; its cover is accessible when you lift the shelf.  A Fastpin stuck through a hole in the ladder side holds it up.  It's made so that if one should descend the ladder while the shelf is up the shelf won't stick out so far so as to catch a heel and break off-- although it does mean there won't be a second shelf in place for the one coming down.

Also two sections of the three-part cabin sole are visible here.  At the time of this photo the center section is just rough plywood-- it'll be varnished mahogany later.

* * *